Use this Insulation R-Value Calculator to combine the nominal R-values of multiple insulation layers and estimate the additional insulation thickness needed to reach a target R-value.
Enter insulation layers
Thickness can be US or metric; R-value per inch remains the material-performance input.
Nominal layer R-value
See each layer’s contribution and the remaining target shortfall.
R-value basics
How layer R-values are calculated
For a uniform insulation material, nominal layer R-value can be estimated from thickness multiplied by the material’s R-value per inch. The calculator repeats that for each entered layer and sums the results.
thickness in inches × R per inchR1 + R2 + R3 + …max(target R − total R, 0)shortfall ÷ add-on R per inchWorked example
Example: two insulation layers
A 3.5 in layer at R-3.5 per inch contributes R-12.25. A 1 in layer at R-5 per inch contributes R-5. The nominal sum is R-17.25. If the target is R-30, the shortfall is R-12.75, requiring about 3.64 in of an added R-3.5/in material.
Whole-assembly caution
Why the real assembly can be different
DOE building-science guidance notes that insulation performance depends on installation quality and on the wider building envelope. Studs, rafters, joists and other framing can create thermal bridges. Air leakage and moisture can also affect performance. This calculator therefore reports a nominal material-layer sum rather than claiming a whole-assembly R-value.
Related tools
Continue the insulation plan
FAQ
Insulation R-Value Calculator FAQ
Can I just add R-values together?
For uniform material layers in series, adding their nominal R-values is a useful material-level estimate. Whole assemblies can differ because of framing paths, air films, gaps, compression and other components.
Where do I get R-value per inch?
Use manufacturer data for the specific insulation product. Generic material ranges are useful for education but not as strong as product-specific data for purchasing or compliance.
Does compression matter?
Yes. Insulation installed at a different thickness/density than its rated condition may not perform as a simple R-per-inch multiplication suggests. Follow product instructions.
Does this calculate code compliance?
No. Code requirements depend on location, assembly and adopted code. This tool only performs nominal layer math from your inputs.