Use this Lumber Weight Calculator to estimate the weight of dimensional lumber from actual thickness, width, length, quantity and an editable wood-density value.
Enter actual lumber size and density
Weight changes with species and moisture content, so density remains an editable input.
Your lumber weight summary
See weight per piece and total estimated load.
Formula
How lumber weight is estimated
The calculator finds the board's physical volume from actual dimensions, then multiplies that volume by the density you entered.
thickness × width × lengthvolume × densityweight per piece × quantityWorked example
Example: ten actual 1.5 × 5.5 × 8 ft boards
One board has about 0.4583 ft³ of physical volume. At an entered density of 35 lb/ft³, the estimated weight is about 16.04 lb per piece, or about 160.4 lb for ten pieces.
Natural variability
Why lumber weight changes
Wood is a natural material. Density varies among species and even within a species, and moisture can substantially change weight. The USDA Forest Products Laboratory Wood Handbook discusses moisture relations, physical properties and the variability of wood properties. For shipping, lifting, structural load or vehicle limits, use conservative project-specific information rather than relying only on an online estimate.
Related lumber tools
Continue your lumber calculations
FAQ
Lumber Weight Calculator FAQ
Why do I need to enter density?
Dimensions alone give volume, not weight. Weight depends on wood density, which varies with species and moisture content.
Should I use nominal or actual lumber dimensions?
Use actual dimensions for physical volume and weight. Nominal dimensions can overstate the wood physically present in surfaced lumber.
Can wet lumber weigh more?
Yes. Added moisture increases mass, which is why a dry-density estimate can understate freshly treated or wet lumber.
Can I use this for structural load design?
Use it as a planning estimate only. Structural dead loads should follow the applicable design data and project requirements.