Skip to content

Insulation R-Value Calculator

Use this Insulation R-Value Calculator to combine the nominal R-values of multiple insulation layers and estimate the additional insulation thickness needed to reach a target R-value.

Thermal layer calculator

Calculate Insulation R-Value Across Layers

Add nominal insulation R-values across up to five material layers, compare the total with a target, and estimate added thickness for another insulation layer.

1

Enter insulation layers

Thickness can be US or metric; R-value per inch remains the material-performance input.

Layer 1
Layer 2
Layer 3 Optional
Layer 4 Optional
Layer 5 Optional
Target total R-value Optional
Add-on insulation R-value per inch
Nominal material calculation: this sums entered insulation-layer R-values. A real wall/roof/floor assembly can perform differently because of framing, thermal bridges, air films, gaps, compression and moisture.
2

Nominal layer R-value

See each layer’s contribution and the remaining target shortfall.

R
Ready for material layersEnter thickness and R-value per inch.

R-value basics

How layer R-values are calculated

For a uniform insulation material, nominal layer R-value can be estimated from thickness multiplied by the material’s R-value per inch. The calculator repeats that for each entered layer and sums the results.

Layer R-valuethickness in inches × R per inch
Total nominal RR1 + R2 + R3 + …
Target shortfallmax(target R − total R, 0)
Add-on thicknessshortfall ÷ add-on R per inch

Worked example

Example: two insulation layers

A 3.5 in layer at R-3.5 per inch contributes R-12.25. A 1 in layer at R-5 per inch contributes R-5. The nominal sum is R-17.25. If the target is R-30, the shortfall is R-12.75, requiring about 3.64 in of an added R-3.5/in material.

Whole-assembly caution

Why the real assembly can be different

DOE building-science guidance notes that insulation performance depends on installation quality and on the wider building envelope. Studs, rafters, joists and other framing can create thermal bridges. Air leakage and moisture can also affect performance. This calculator therefore reports a nominal material-layer sum rather than claiming a whole-assembly R-value.

Related tools

Continue the insulation plan

FAQ

Insulation R-Value Calculator FAQ

Can I just add R-values together?

For uniform material layers in series, adding their nominal R-values is a useful material-level estimate. Whole assemblies can differ because of framing paths, air films, gaps, compression and other components.

Where do I get R-value per inch?

Use manufacturer data for the specific insulation product. Generic material ranges are useful for education but not as strong as product-specific data for purchasing or compliance.

Does compression matter?

Yes. Insulation installed at a different thickness/density than its rated condition may not perform as a simple R-per-inch multiplication suggests. Follow product instructions.

Does this calculate code compliance?

No. Code requirements depend on location, assembly and adopted code. This tool only performs nominal layer math from your inputs.

Scroll to Top