Skip to content

Blown-In Insulation Calculator

Use this Blown-In Insulation Calculator to estimate whole bags, installed coverage, total bag weight and optional material cost from the coverage chart supplied with your insulation product.

Loose-fill material takeoff

Estimate Blown-In Insulation Bags & Coverage

Estimate whole bags, installed coverage, total weight, optional cost and approximate material volume from the coverage chart on your chosen product.

1

Enter label coverage and project area

Read coverage, installed thickness and bag weight from the product chart at the R-value you intend to install.

Net insulation area
Coverage per bag at chosen R-value
Installed thickness from label Optional
Chosen installed R-value
Extra material allowance
Bag weight Optional
Price per bag Optional
Use the product chart: loose-fill coverage changes with the chosen R-value, settled thickness and installed density. Enter the coverage printed for the exact product and R-value.
2

Blown-in material summary

Whole bags are rounded up so the entered adjusted area is covered.

≋
Ready for the bag labelEnter project area and coverage per bag.

Product-label workflow

Why bag coverage is the key input

Loose-fill insulation is installed to a specified density and depth. Manufacturers publish coverage charts showing how many square feet one bag covers at different R-values. That product-specific number is more useful than pretending all cellulose or fiberglass bags have the same yield.

Adjusted areanet area × (1 + allowance %)
Whole bagsceil(adjusted area ÷ coverage per bag)
Purchased coveragebags × coverage per bag
Total weightbags × entered bag weight
Optional costbags × entered price

Worked example

Example: 1,200 ft² at 50 ft² per bag

With a 5% allowance, adjusted area is 1,260 ft². At 50 ft² per bag, 1,260 ÷ 50 = 25.2, so the purchasing estimate rounds up to 26 bags. Always install to the product’s stated minimum bag count, depth and density requirements rather than relying on visual depth alone.

Installation quality matters

Bag count is not a substitute for installed density

DOE weatherization job aids call for blown insulation to be installed to the prescribed R-value and correct density, with documentation that can include insulation type, coverage area, installed/settled thickness, R-value and number of bags. Follow the product instructions and applicable program/code requirements.

Related tools

Continue the insulation plan

FAQ

Blown-In Insulation Calculator FAQ

Why can’t the calculator use one standard square-feet-per-bag number?

Coverage varies by product, material, target R-value and installed density. Use the coverage chart printed or published for your exact insulation product.

Should I add an extra bag?

The calculator lets you add an allowance, but the installed job should still satisfy the manufacturer’s minimum bag count, thickness and density requirements for the selected R-value.

Does the estimated volume determine bag quantity?

No. Volume is informational when a label thickness is entered. Bag quantity is calculated from the product-specific area coverage you provide.

Can I use this for old vermiculite insulation?

No. EPA advises treating vermiculite attic insulation as potentially asbestos-contaminated and leaving it undisturbed. Consult appropriate professionals rather than disturbing it for measurement.

Scroll to Top