Use this Fence Calculator to estimate total fence length, post bays, posts, pickets and horizontal rail footage from multiple straight runs, gate openings and your own spacing assumptions.
Enter your fence runs and layout assumptions
Measure each uninterrupted straight run separately. Leave unused runs at zero.
Your fence planning summary
Review line length, bays, post quantity and approximate infill quantities.
Overall fence planning
How to use the Fence Calculator
Use the flagship Fence Calculator when you want one broad estimate before moving into the narrower post, spacing, cost or picket tools. Enter each straight run separately so corners can be represented without pretending the whole fence is one straight line.
- Measure each straight fence run. Enter up to four uninterrupted segments.
- Enter a planning post spacing. The calculator divides each run into enough bays so the equalized bay length does not exceed the spacing you entered.
- Subtract gate openings from infill. Gate width is removed from picket and rail quantities, but gate framing and hardware are not designed here.
- Add picket width and gap. These values create an approximate picket count for the net infill length.
- Use the specialist tools next. Refine post holes, exact spacing, cost or picket layout on their dedicated pages.
Transparent math
Fence formulas used
ceil(run length ÷ entered max spacing)bays + 1total fence length − gate openingsceil((infill + gap) ÷ (picket width + gap))ceil(pickets × (1 + waste %))net infill length × rails per lineShared-corner posts are subtracted once after the individual run counts are calculated. The largest equalized bay is the widest bay created across the runs from the spacing assumption you supplied.
Worked example
Example: a 100 ft straight fence with one 4 ft gate
Using a 100 ft run, 8 ft maximum post-spacing assumption, 4 ft of gate opening, 3½ in pickets, 2 in gaps and two horizontal rails:
ceil(100 ÷ 8) = 13 bays13 + 1 = 14 posts100 − 4 = 96 ft96 × 2 = 192 linear ftThe picket quantity is then based on 96 ft of infill and the entered picket face/gap. Treat it as a broad purchasing estimate; exact end conditions and gate framing can change the final count.
Measure first
Fence takeoff tips
- Break property lines into straight segments instead of measuring only a perimeter total.
- Record gate openings separately so infill material is not counted through the opening.
- Use actual picket face width, not only the nominal product name.
- For panels, rails or pickets sold in fixed lengths, allow for cuts and unusable offcuts separately.
- Verify property boundaries, utilities, easements and local requirements before digging.
Know the limits
Assumptions and limitations
This tool estimates quantities from geometry you enter. It does not determine whether the chosen post spacing, fence height, rail arrangement, footing dimensions, wind resistance, gate support or attachment method is suitable for your fence system.
Irregular terrain, stepped or racked panels, retaining walls, corner assemblies, terminal posts, gate posts, decorative patterns, slopes and product-specific installation rules can all change quantities.
Common questions
Fence Calculator FAQ
How many fence posts do I need?
The flagship calculator estimates posts by dividing each straight run into enough bays to stay at or below your entered spacing, then adding the run end posts and subtracting any shared corners you identify.
Does the gate width reduce the post count?
No. Gate openings are removed from picket and rail infill quantities only. Gate-post layout varies by gate system, so use the Fence Post Calculator and your gate hardware requirements for a more specific plan.
Can I use this for fence panels?
Yes for broad line/post geometry, but fixed-width panel systems should be checked against the manufacturer’s actual panel width and post-to-post installation dimensions.
Does this calculator choose a safe post spacing?
No. The spacing is an input, not a structural recommendation.
Why are there separate fence calculators?
Cost, post-hole quantities, exact post spacing and picket infill are different calculation intents. Separate tools let each one show the assumptions and formulas that matter for that question.
Keep planning
Related fence calculators
Methodology
Visible assumptions, checkable math
BuildCalcForge keeps spacing, gate, picket and waste assumptions visible so the result can be checked against the actual fence system.